How do you tune a 12 string guitar?!
Question: How do you tune a 12 string guitar!?
Answers:
*
Tune the major strings (EADGBE) just like a regular guitar
Then tune each secondary string an octave higher
Here's how to restring and tune a 12 string:
Loosen and remove the low E (sixth) string and it's accompanying higher octave string!.
Using a soft cloth (and optional guitar-cleaning agent), polish the exposed portion of fretboard and headstock!.
Restring both strings, taking care to keep the higher octave string in the top (closest to you) position!.
Bring each string approximately 1-1/2 inches past it's appropriate tuning peg!. Make a 90 degree angle bend in the string at this point!. Feed the string through the tuning peg, up to the bent point!.
Bend the string at the point it protrudes from the tuning peg!. This will hold the string in place as you tune it!.
Bring the strings into approximate tune!. Since pitch will change somewhat as other strings are being changed, exact tuning is not required at this point!.
Using a pair of pliers, cut off the excess string, leaving approximately 1/4 of an inch of the string protruding from the tuning peg!.
Repeat steps one through seven for each of the remaining five string groups!.
Using a tuner, fine tune the pitch of each string!. Standard tuning for the 12-string guitar is as follows: E(upper octave),E | A(u!.o!.),A | D(u!.o!.),D | G(u!.o!.),G | B(unison),B | E(unison),E
Www@Enter-QA@Com
Tune the major strings (EADGBE) just like a regular guitar
Then tune each secondary string an octave higher
Here's how to restring and tune a 12 string:
Loosen and remove the low E (sixth) string and it's accompanying higher octave string!.
Using a soft cloth (and optional guitar-cleaning agent), polish the exposed portion of fretboard and headstock!.
Restring both strings, taking care to keep the higher octave string in the top (closest to you) position!.
Bring each string approximately 1-1/2 inches past it's appropriate tuning peg!. Make a 90 degree angle bend in the string at this point!. Feed the string through the tuning peg, up to the bent point!.
Bend the string at the point it protrudes from the tuning peg!. This will hold the string in place as you tune it!.
Bring the strings into approximate tune!. Since pitch will change somewhat as other strings are being changed, exact tuning is not required at this point!.
Using a pair of pliers, cut off the excess string, leaving approximately 1/4 of an inch of the string protruding from the tuning peg!.
Repeat steps one through seven for each of the remaining five string groups!.
Using a tuner, fine tune the pitch of each string!. Standard tuning for the 12-string guitar is as follows: E(upper octave),E | A(u!.o!.),A | D(u!.o!.),D | G(u!.o!.),G | B(unison),B | E(unison),E
Www@Enter-QA@Com
EeAaDdGgBbEeWww@Enter-QA@Com
turn the little knobby things at the end of the neckWww@Enter-QA@Com